:: Journal of Radiological Science and Technology ::

About US +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Evaluation of the Shield Performance of Lead and Tungsten Based Radiation Shields

Jeong-Hwan Park, Hyeon-Seong Lee, Eun-Seo Lee, Hyo-Jeong Han, Yun-Hee Heo, Jae-Ho Choi

Journal of Radiological Science and Technology :: Vol.46 No.6 pp.519-526

DOI:https://doi.org/10.17946/JRST.2023.46.6.519
Open abstract
A Study on the Usefulness of Copper Filters Made with 3D Printers in Longbone Examination Using Long Length Detector

Woo-Young Kim, Hyun-Soo Seo, Bong-Ju Han, Myeong-Seong Yoon, Young-Jin Lee

Journal of Radiological Science and Technology :: Vol.44 No.6 pp.607-613

DOI:https://doi.org/10.17946/JRST.2021.44.6.607
Open abstract
Evaluation of Tungsten Blended Filament Shields Made by 3D Printer in Radiography

Joon Yoon, Myenog-Seong Yoon

Journal of Radiological Science and Technology :: Vol.44 No.6 pp.615-621

DOI:https://doi.org/10.17946/JRST.2021.44.6.615
Open abstract
Usefulness of Brain Phantom Made by Fused Filament Fabrication Type 3D Printer

Yong-Ki Lee, Sung-Min Ahn

Journal of Radiological Science and Technology :: Vol.43 No.6 pp.453-460

DOI:https://doi.org/10.17946/JRST.2020.43.6.453
Open abstract
Study on 3D Printer Producing of Assistive Devices for Vertical Incidence of Law Method

Sang-Hyun Kim

Journal of Radiological Science and Technology :: Vol.43 No.6 pp.489-494

DOI:https://doi.org/10.17946/JRST.2020.43.6.489
Open abstract
Evaluation of the Usefulness of Patient Customized Shielding Block Made with 3D Printer in the Skin Cancer Electron Beam Therapy

Ki-Song Ahn, Woo-Chan Jung, Dae-Hyun Kim, Moo-Sub Kim, Do-Kun Yoon, Jae-Goo Shim, Tae-Suk Suh

Journal of Radiological Science and Technology :: Vol.42 No.6 pp.447-454

DOI:https://doi.org/10.17946/JRST.2019.42.6.447
Open abstract
Developing Customized Phantom for Korean Bone Density Using 3D Printing

Junho Lee, Kwan-Yong Choi, Jae-Ho Choi

Journal of Radiological Science and Technology :: Vol.42 No.3 pp.223-229

DOI:https://doi.org/10.17946/JRST.2019.42.3.223
Open abstract
A Study on the Fabrication and Comparison of the Phantom for Computed Tomography Image Quality Measurements Using Three-Dimensions Printing Technology

Myeong-Seong Yoon, Soon-Min Hong, Yeong-Cheol Heo, Dong-Kyoon Han

Journal of Radiological Science and Technology :: Vol.41 No.6 pp.595-602

DOI:https://doi.org/10.17946/JRST.2018.41.6.595
Open abstract
Development of CT/MRI based GUI Software for 3D Printer Application

Jung Young-Jin

Journal of Radiological Science and Technology :: Vol.41 No.5 pp.451-456

DOI:https://doi.org/10.17946/JRST.2018.41.5.451
Open abstract
Dose Evaluation of Three-Dimensional Small Animal Phantom with Film Dosimetry

Su Chul Han, Seungwoo Park

Journal of Radiological Science and Technology :: Vol.40 No.1 pp.87-92

DOI:https://doi.org/10.17946/JRST.2017.40.1.13
Open abstract
Scintillation Properties of Acrylate Based Plastic Scintillator by Photoploymerization Method

Sunghwan Kim, JoonIl Lee

Journal of Radiological Science and Technology :: Vol.39 No.4 pp.637-642

DOI:https://doi.org/10.17946/JRST.2016.39.4.21
Open abstract
Study on 3D Printer Production of Auxiliary Device for Upper Limb for Medical Imaging Test

Hyeong-Gyun Kim, Jae-Ho Yoon, Seong-Dae Choi

Journal of Radiological Science and Technology :: Vol.38 No.4 pp.389-394

DOI:https://doi.org/10.17946/JRST.2015.38.4.08
Open abstract
Comparison of Hounsfield Units by Changing in Size of Physical Area and Setting Size of Region of Interest b y Using the CT Phantom Made with a 3D Printer

Youl-Hun Seoung

Journal of Radiological Science and Technology :: Vol.38 No.4 pp.421-427

DOI:https://doi.org/10.17946/JRST.2015.38.4.12
Open abstract